Cutting Aluminum Gutters with Miter Saw – 4 Steps Made It Easier!

An under-developed or poorly manufactured gutter system is nothing but a nightmare, especially when it becomes unable to transport rainfall from your rooftop to a specific location. In that case, using a miter saw can be your best decision to repair it thoroughly. 

But what if the gutter system is made of aluminum? It seems like everything turns way harder, is it? I don’t think so because, along with laminate flooring, cutting aluminum gutters with a miter saw is a snap when you get the right guide and proper gear; you heard it right!

In this article, I’ll give you step-by-step ideas on cutting Gutter with a miter saw, and that too without breaking your back. This might really be your lucky day!

Things Needed:

For cutting gutters with a miter saw, you need to collect some essential things given below: 

• Pencil or Marker pen
• Measuring tape
• Safety gloves

How to Cut Aluminum Gutters with Miter Saw – Step-by-Step Guide:

Now that you have gathered the necessary things let me teach you how to cut gutters with miter saw using no complex techniques—feeling excited?

Step-1: Getting Prepared

Firstly you need to unplug the miter saw from the electrical socket if it is plugged in. Then, to cut the aluminum gutter, you need to install a suitable blade on the miter saw.

Indeed, you can cut many things with a miter saw. There are many types, and sizes of blades for the miter saw to cut aluminum. That said, carbide finish blades are ideal for cutting aluminum. 

Step-2: Measuring and placing the Gutter

Now you have to measure the Gutter to your desired length. To do this, grab the measuring tape and mark it with a pencil or marker pen on the edge of the Gutter. Next, let’s place the Gutter on the table of the miter saw.

In that case, you have to hold the Gutter opposite the fence of the saw table. You need to pay attention if the Gutter goes to the corner. Depending on the model, the angle of the miter saw differs. In the majority of cases, the angle is about 45 degrees. 

Step-3: Positioning the Blade of Saw

Position the blade towards the Gutter. To assure you get the whole length, place the blade about 1/16-inch outside of the marked line instead of directly on top of the line. Now just stand behind the miter saw, and lower it down to the Gutter.  

Step-4: Cutting It Up!

Now, Plug in the miter saw to the electrical socket and trigger the button. Grab firmly one side of the Gutter and lower down the blade slowly to the Gutter. Just cut all the way across at a constant speed.

After finishing the cut, pull the miter saw up to the starting or resting point. Now, just repeat the whole process for additional aluminum cuts.

Note: Do you need to get practical knowledge on cutting aluminum? Watch this one!

Final Words!

As you can see, cutting aluminum gutters with miter saw requires no complicated things and stuff, meaning you can do it yourself without even calling any plumbers. Trust me; this guide is all you need to get the whole task as easy as falling off a log!

Frequently Asked Questions (F.A.Q.’s):

What is the best way to cut aluminum gutters?

There are many ways to cut aluminum gutters. But using a miter saw for cutting aluminum is more versatile, more accessible, and a time saver. You just need to measure, mark and place the Gutter on the saw table. After that, grab the opposite side of the Gutter and place firmly down the saw blade in the Gutter. That’s it! 

What saw blade to cut gutters?

In a nutshell, the best saw blade to cut gutters is the carbide-tipped 12-inches blade.

How do you cut sheet metal gutters?

Although a top-notch miter saw can cut gutters of multiple types of materials, it’s best to rely on tin snips or razor-sharp shears in terms of cutting sheet metal gutters.