How Deep Can a 7 Inch Angle Grinder Cut (Explained)

For heavy-duty projects, every expert carpenter like to rely on the 7-inch angle grinder being functional and versatile. But without knowing “how deep can a 7 inch angle grinder cut,” it isn’t possible to make the best use of it. Ask why?

Simply because the cutting disc may get stuck inside the material in case you cross the max limit of your angle grinder’s cutting depth. So without proper education, beginners can have a really hard time! Let’s keep your worries aside, as I’ll explain the truth right here! 

How Deep Can a 7 Inch Angle Grinder Cut?

As you know, anger grinders come up with a limited amount of disc size to operate. So there would also be limitations and restrictions when it comes to their cutting depth. In short, a 7-inch angle grinder is able to get as deep as 55 mm to cut through any material. 

And depending on the size, you may find differences in terms of the cutting depth of a handheld angle grinder. As a result, a 4.5-angle grinder won’t be similar to a 7-inch grinder in terms of cutting depth. 

How Thick Is a 7 Inch Angle Grinder Cutting Disc?

1.5 mm is considered the average thickness of a 7-inch angle grinder. This makes it an excellent go-to for daily standard cutting applications on mild or stainless steel. Moreover, such thicknesses aid in performing mid-to-heavy-duty tasks with the maximum precision possible!

What Can a 7 Inch Angle Grinder Cut?

Let it be porcelain tile, Corian, rebar, or any kind of mild steel, a 7-inch angle grinder is able to deal with all. In fact, most 7-inch grinders feature a superior motor, allowing them to work smoothly with challenging and heavy-duty applications. 

As for dealing with metal, it is quite compatible with pipes, steel, bolts, iron, and so on to make it multi-functional. Based on the type of material, you just need to apply the right steps to get the work done with precision.

How to Use a 7-Inch Angle Grinder to Cut Materials

Using an angle grinder requires you to follow a specific rule to overcome potential damages and injuries. So even though this handheld tool is pretty easy to operate, you better go through the steps to know the best way of operating a 7-inch grinder:

Step-1: Workspace Preparation

Without jumping right into the cutting, you must confirm the workspace you selected to cut your desired materials is free from every obstacle. Make sure that surface doesn’t contain any sharp or pointy objects.

Step-2: Prepare Yourself

Once you’ve prepared the workspace, it is time to cover yourself with the right safety gear. Even though you’re going to work with a small handheld tool, chances are sawdust or dirt particles will irritate you during the step.

So, I’d prefer wearing hand gloves, goggles, a helmet, and ear protection to avoid potential injuries.

Step-3: Secure the Material

Before you start the handheld power tool, let’s not forget to mark the material for the cut you want to make. For that, I’d prefer to use a pencil or marker. Next, get the material well-secured on the workspace using additional clamps.

Step-4: Start the Angle Grinder

By adjusting the guard right into the top, you’re allowed to start up the tool. Wait a bit till it gets into its max range of speed. Before you begin, make sure you’ve adjusted the cutting depth of your 7-inch angle grinder to get your desired cut.

Step-5: Add a Finishing Touch

Once you’ve made a precise cut on the font size of the material, turn it around right away. For this, you’ll need to unfasten the clamp and then fasten it again to secure the material.

Following the previous direction, cut from the rear and lift up the angle grinder once you’re done. Switch it off and clean the stuck dirt particles by removing the blade guard.

Final Words!

Through this write-up, I’ve explained “how deep can a 7 inch angle grinder cut,” including its thickness, use process, and suitability with materials. Ensure to make the best use of your 7-inch angle grinder, considering the type of material and its compatibility. 

If not, then the cutting disc may get cracked with improper usage!