If you have experience drilling into concrete, you better know about it. Drilling holes in concrete is difficult, especially if you don’t have the right tools. This process can be challenging because the concrete may break and cause the hole to get bigger or smaller than usual. 

Stop scratching your head; I’ve got you covered! It would help if you didn’t forget about the versatility of an impact driver, which can do almost everything. But can you drill into concrete with an impact driver? 

Well, this is what I’m going to talk about today. Following the five basic methods can be done without even taking experts’ assistance. So let’s get deeper to learn all the nooks and crannies right away!

Can I Use Impact Driver on Concrete?

An impact driver, also known as a hammer driver, can be used on concrete floors and walls. But it is not recommended for use on asphalt or cement paving. Before using an impact driver on concrete, you should test it out on a scrap piece of hammer driver and a regular driver both spin to create holes, but they work in different ways.

How to Drill Holes in Concrete with an Impact Driver: 5 Easy-Peasy Steps

Step-1:

The best place to start is with the concrete itself. Find the lowest point on the concrete and drill a pilot hole there. 

Step-2:

The deeper you go, the stronger the anchor will be. Add another half-inch to your hole for every layer of concrete you go through. 

Step-3:

So if you’re drilling a quarter-inch into the top layer of concrete, make it 3/8″ deep into the ground underneath it.

Step-4:

Then you have to push your screw into that hole. Now it’s time to put in your screws! Make sure they’re tightened down by hand, then use pliers to get them as tight as possible. That’s the least you can do.

Step-5:

Finally, it is time to get a meter and verify the concrete. You want to see at least 6 pounds of torque pushing on that screw.

If you follow these steps, then as long as your screw holes are straight, dry, and have good soil around them: you’re pretty much good to go!

Can You Drill into Brick with an Impact Driver?

Modern brick homes tend to be less capable of holding screws. They don’t have the pilot holes; you need to drill with a screwdriver-type drill/driver. The impact driver locks onto the head of the screw and then uses a rapid tapping to generate rotational momentum. Once I had mastered using it properly, I never had another problem with these drills/drivers!

Drilling Holes in Concrete with Impact Driver – Is It Safe?

It is not safe in every situation to drill through a concrete column. It will weaken the structure. This method applies to interior and exterior columns on new or old buildings.

However, it is possible to attach something to an exterior column. Suppose you put it in between two reinforcing forms after pouring concrete. Be sure to patch the holes to prevent water from damaging the bare concrete.

Will My Drill Work On Concrete?

A regular drill will not work on concrete. If you want to drill through concrete, you need to use an impact hammer drill. Even with an impact hammer type of drill, it can be difficult because all that hammering can make the bit get stuck in the concrete and break it off. To improve your chances of making a hole in the concrete, you need to start with a carbide steel drill bit. 

Which Drill Machine Is Best For Concrete?

Depending on the job you’re planning to do, there are two main types of drill machines suitable for working with concrete: hammer drills and impact drivers.

Hammer drills deliver a rotating movement transmitted into a pounding motion thanks to an internal mechanism. Impact drivers, on the other hand, offer fast and powerful rotations that are transmitted into the material through sheer kinetic energy.

Why Should You Drill Into Concrete?

Drilling into concrete is an excellent way to add new hooks, shelves, and other hardware. There are plenty of reasons to drill into concrete; here are they:

• To find water, fuel lines, and electrical circuits that may have become disconnected and hidden over time.
• To create more minor pathways for new pipes or wires.
• To assist with excavation of buried structures or deep foundations. 
• To avoid potential interference with existing, hidden infrastructure. And drills are often the best tool for preventing costly damages.

Wrapping Up

So if anybody asks – “can you drill into concrete with an impact driver,” show them what you’ve learned through this single write-up! When using an impact driver to drill holes in concrete, it is vital to make sure that you have aligned the bit correctly with the workpiece. This article will ensure that you don’t cause any damage to the material when you start drilling.

Sanding concrete isn’t child’s play, and you can’t get it done successfully unless you have the right tool. Yes, getting the best angle grinder for concrete is what I was talking about. It’s a must-have power tool that needs to be durable, lightweight, and quite strong to deal with multiple applications, especially concrete sanding by expert workers and homeowners.

To achieve the best finish and at the same time smoothen the concrete floor surface, your angle grinder should have an optimal RPM range, preferably 6000 to 8500, according to experts. Luckily, most of my selected products have these ranges to help you make your grinding task more precise and even better.

So, let’s check out the reviews and find out what suits your grinding skills most!

Top 9 Best 7 Inch Angle Grinder for Concrete Reviews

Here is a descriptive review of the best 7 inch angle grinder for concrete.

Our Top Picks

Makita GA7021 is by far the best 7-inch angle grinder for its 15-amp powerful motor, rubber-molded ergonomic handle, and effective wheel guard for relatively easier and quicker blade adjustments. 

1. Best Overall: Makita GA7021 7 Inch Angle Grinder

If you ask me to show you a single product that can do all the nooks and crannies related to grinding concrete, I’d love to suggest getting the Makita ga7021 7-inch angle grinder! From portable size to powerful motor, it has everything to make a place in your arsenal.

Talking about the power, the Makita ga7021 is known for its super-effective 15.0 amp motor that offers no less than 6600 RPM. Thus, it can handle almost every task about grinding concrete slab, aluminum and steel. The wheel guard it gets is tool-free, ensuring relatively easy and quick adjustment while grinding.

I’ve found its gripping area quite comfortable due to the rubber-molded handle. And luckily, you’re allowed to keep your workpiece 100% damage-free; the credit goes to its rubber tool that’s pretty large.

Weighing about 15.4 pounds, handling the corded-electric angle grinder will be a snap; you won’t feel discomfort even after holding it for an extended work period!

Key Features:

• Teal color
• 0 amp motor
• Measuring 21.25 x 9.25 x 7.0 inches
• Weighs about 15.4lbs

Pros

• The motor is quite powerful and delivers 6600 RPM.
• Pretty handy for the rubberized grip and mediocre weight
• Wheel guard confirms easy and quick blade adjustments
• Keeps workpieces free from damage with its large rubber tool
• Designed to withstand heavy loads and pressures

Cons

• Requires extra maintenance while keeping it neat!

2. Best for Speed: Dewalt DW840 7-inch Angle Grinder

The brand “Dewalt” requires no introduction when talking about angle grinders. Especially when we speak about this Dewalt 7 inch angle grinder, it stands out from the rest for its extreme speed and top-notch build quality.

Speaking of the speed, it comes in a 13.0 amp superior motor providing 8500 RPM at once. This way, it can be used not only for grinding your concrete floors within no time but also for any type of metal. By just spindle-locking the switch, users can replace the wheels of a single wrench while needed. And needless to say, it can run by both DC/AC power quite efficiently.

The build quality of this Dewalt 7 inch grinder takes the popularity to a new height, thanks to the premium-quality alloy steel with a perfect blend of plastic materials. And don’t worry about the comfort; the lightweight structure along with the back-handle gripping area has got your back!

Key Features: 

• Yellow color
• 0 amp motor
• Measuring 21.5 x 8.88 x 4.38 inches
• Weighs about 8.0lbs

Pros

• Heavy-duty motor with alloy steel construction
• 8500 RPM for maximum efficiency
• Adjustable guard with a spindle-lock switch
• Light-weighted and comfy rear-handle gripping area

Cons

• Overheating issues!

3. Best Multi-functional: Dewalt DW840 7-inch Angle Grinder

If you think versatility comes first for concrete grinding, I’d recommend spending your valuable bucks on this 7-inch grinder from Dewalt made for multiple applications; this includes grinding concrete, aluminum, stainless steel, alloy, and so on!

Similar to my previous choice, this one right here also has got a 13.0 amp motor, yet the range of RPM is 8000. It’s enough to deal with heavy-duty projects related to DIY and construction sites. No need to be worried about the safety as it comes in an additional guard that’s adjustable in terms of redirecting sparks.

What’s more? Rear handle design, metal frame, spindle lock switch, and more interestingly, a roller bearing (sealed) is well-equipped with this power tool, enhancing the motor life in the best way possible!

Key Features: 

• Yellow color
• 0 amp motor
• Measuring 5.75 x 21.44 x 12.38 inches
• Weighs around 19.0lbs

Pros

• 0 HP motor can withstand heavy pressure
• Includes safety guard as well as spindle lock switch for safety
• Rear handle gives you convenience in terms of making a solid grip
• A high-quality metal frame maximizes durability
• Includes a portable bag and several cutting wheels additionally

Cons

• A little costly in this category!

4. Best for Heavy-Duty: Dewalt D28499X Angle Grinder Tool

To get the maximum power for grinding concrete, nothing can beat the efficacy of the Dewalt D28499X Angle Grinder Tool. 5.3 HP superior motor, 6000 RPM, rear rotating handle, you name it; this one right here gets a relatively low-profile case, enabling you to access tough-to-reach areas without any issues.

Besides that, the unique rubber cord coming in an S-shape design is perfectly-insulated with double wires, confirming extended life and durability in both cold and hot climates. Even beginners can get the most out of this 7-inch angle grinder due to its shut-down brushes that automatically prevent damages.

The unique part? Dewalt 7 inch grinder features a side handle of 5 positions, offering enhanced ergonomics for some limited applications.

Key Features:

• Yellow color
• 3 Horsepower motor
• Measuring 10.13 x 24.25 x 5.06 inches
• Weighs 16.4lbs

Pros

• Ensures ultimate power for heavy-duty projects
• Offers increased ergonomic with rear and side handles
• It gives you extended service life from abrasion
• Tool-less guard, automatic shut-off, and rubber cord for safety
• Compatible with both DC/AC power; works well in cold and hot seasons

Cons

• Too pricey!

5. Best for Tight Areas: Dewalt DWE4517 7 Inch Angle Grinder

Is it getting surprised? It seems like the Dewalt is dominating the list of the best 7-inch angle grinder! Yep, this is because this single brand can give you multiple types of concrete angle grinders to meet your several needs at once. And talking about the DWE4517, it’s quite popular for its low-profile design, making it friendly with tight areas.

<

Alongside the compact case, this one also has got a field of epoxy coated and automatic shut-off brushes for ultimate safety. Coming in a powerful 4.0 HP motor, it spins around 8500 RPM, and that too under heavy loads and pressures; the credit goes to its thermal overload protection.

As you can see, the maker has added a double-positioned side handle, offering excellent ergonomics to help you perform a variety of applications without dealing with any discomfort. To get the maximum result in concrete grinding, the manufacturer suggests using wheels of no more than 7-inch.

Key Features:

• Yellow color
• 0 Horsepower motor
• Measuring 24.02 x 9.76 x 4.92 inches
• Weighs no more than 12lbs

Pros

• Metal frame with a low-profile design for using it in tight areas
• It helps you stay in a safe zone, thanks to its automatic shut-off feature
• Double-positioned side handle for eventual comfort and flexibility
• Able to grind concrete quite smoothly with 7-inch grinding wheels

Cons

• Arbor bearing seems a bit weak!

6. Best Value for Money: Dewalt DWE4557 Angle Grinder

Professionals require an angle grinder that can smoothly grind a spacious floor made of concrete. Only a couple of power tools can stay out of the issues with overheating while grinding concrete for hours at a stretch. Thanks to the Dewalt DWE4557 that makes the whole task a breeze with its 4.7 HP motor, which spins at 8500 RPM.

Another thing that makes it stand out is its effective dust ejection system designed to keep the motor safe against harmful, damaging particles and objects. Even it offers decreased vibration despite being so powerful; this is only because of its soft trigger handle that is anti-vibe.

Dewalt gives you a built-in brush door that works just fine for quick and hassle-free replacement. Moreover, adjusting the guard can also be done quickly in terms of redirecting sparks on account of its fast-change guard.

Thinking about your safety, the maker didn’t forget to add an automatic shut-off switch, which really works in case the brush requires to be replaced. And last but not least, the weight of this power tool is only 11.6lbs to confirm a fatigue-free operation!

Key Features: 

• Yellow color
• 7 Horsepower motor
• Measuring 24.21 x 4.92 x 9.84 inches
• Weighs 11.6lbs

Pros

• Overload protection, effective dust ejection, and automatic shut-off for safety
• Lets you make hassle-free replacements with the help of a built-in brush door.
• Spins at 8500 RPM to deal with heavy projects like grinding metal, concrete, etc
• Ensures quick and safe adjustment with its fast-changing guard
• The trigger handle is anti-vibe as well as known for enhanced comfort

Cons

• Costly in this category, still worth it!

7. Best Battery-Powered: MILWAUKEE M18 Angle Grinder

Still, want to know what the best angle grinder for concrete is? If you’re a fan of MILWAUKEE, then I can guarantee that you can’t overlook its power, performance, and durability! 

The first impression of this great angle grinder is its brushless motor, which works more effectively than your typical grinders in terms of grinding concrete and such things. M18 is 50% more powerful and cooler than the same-category angle grinder.

And guess what? This is also known for ensuring maximum protection against overheating issues due to its overload protection. I really loved its cordless feature, allowing users to keep it everywhere to perform several applications. Quick guard adjustment, portable bag, and more interestingly, you’re getting a large 18V grinder for corded performance!

Key Features: 

• Red color
• 12HD lithium-ion battery
• Measuring 5 x 24 x 12 inches
• Weighs 18.0lbs

Pros

• The Brushless motor runs at 6600 RPM.
• Ensures protection against overheating issues
• 20% cooler and more powerful than the standard grinder
• Cordless design makes it easy to transfer from job to job
• Battery-powered yet compatible with corded performance as well

Cons

• A bit weighty compared to other battery-powered grinders!

8. Best for Homeowners: Metabo G18ST 7 inch Angle Grinder

On number 8, I’ve got this 7-inch angle grinder from Metabo, which I’ve found pretty lightweight for better maneuverability. Weighing only 10.8 pounds, this features a 15.0 amp motor that offers plentiful torque, power, and durability, an ideal pick for every homeowner.

Even being quite energetic, it doesn’t get overheated too soon as it gets top-leading overload protection. Furthermore, its stator design (halved) ensures optimal cooling efficacy, and this way, it makes the motor more long-lasting.

The best part of this angle grinder is the labyrinth construction, preventing debris and dust from accessing motor bearing and coils. So keep on grinding concrete smoothly and effectively with the Metabo 7 inch Angle Grinder.

Key Features: 

• Green color
• 0 amp motor
• Measuring 18.5 x 9.5 x 4.3 inches
• Weighs only 10.8lbs

Pros

• Compact and lightweight design for fatigue-free operation
• Protection tape and armored coils extend the service life
• Labyrinth construction keeps debris and dust away from the motor
• Stator design for excellent cooling efficiency

Cons

• Handle is less comfortable for big-handed persons!

9. Best Compact: BOSCH 1974-8 7 Inch Angle Grinder

I’m going to wrap up the list with a compact yet energetic angle grinder from Bosch. Let it be concrete, aluminum, steel, or anything related to these materials; I’d say Bosch 7-inch concrete grinder has the ability to get the work successfully done.

Coming in a low-profile design, you’ll find it much more durable as the manufacturer has added premium metal to make it reliable and rigid. Consequently, it’ll last pretty longer compared to your typical 7-inch angle grinders.

Talking about the motor, it comes in at 4.0 horsepower for excellent performance, especially if you’re someone who needs to grind concrete or such materials frequently. But yes, it’s a bit steeper than the other traditional options!

Key Features:

• 0 horsepower motor
• Made of high-quality metal
• Weighs about 13.8lbs

Pros

• Able to work with concrete, light stone, aluminum, and steel
• Powerful and ensures better performance
• Relatively compact for easy and hassle-free operations
• It doesn’t get overheated too soon

Cons

• Expensive!

Things to Consider When Buying the Best 7-Inch Angle Grinder for Concrete

Still, having doubts about the best angle grinder for concrete? Well, many people get overwhelmed after looking at so many features and specs. If you’re one of those, then this buyer’s guide will really come in handy!

Here, I’ll incorporate only the core factors that you must look for prior to making your buying decision. So take a pen and keep the below-mentioned things noted:

1. Consider the Power Type

At first, you need to determine which power type suits your requirements best. Generally, corded and cordless are the two common types among customers. Each of them has its own specs and qualities. But in a nutshell, corded ones offer more torque and power in most cases, while the cordless one can be used anywhere.

2. Power

A high-quality motor and higher RPM is a perfect combination of power that you’ll need to grind your concrete floors quite effectively. The motor horsepower your motor has, the better it’ll perform; and the same thing goes to the rate of RPM, so there is no rocket science!

Another thing is pretty related to power; yep, I’m talking about the speed. The best 7-inch angle grinder should run so quickly so that you can complete your task within a shorter period.

3. Build Quality

A low-end plastic model can give you nothing but disappointment. So if you want to get your angle grinder long-lasting and durable, go for something that’s made of alloy steel or other heavy metals. But it’s absolutely okay if the plastic appears sturdy and able to withstand heavy torture.

4. Comfortable

As for comfort, two things come together; lightweight design and soft gripping area. So it makes sense that you spend your bucks on an angle grinder that gets any of them, for which you can ensure a fatigue-free operation even after working for too long!

Besides, having a model that features a low-profile design is a plus. If yes, you can get the maximum convenience in accessing tight areas during concrete grinding.

5. Safety Features

Last but certainly not least, the model you want to purchase should at least have a couple of safety features, which the majority of you overlook and end up with minor-to-major damages every single year. Let’s have a look at the 3 essential safety features at a glance:

• Automatic Shut-Off: If your power tool gets overheated or requires replacing the grinding wheels, the motor shuts off straight away with the help of this feature.
• Thermal Overload: It itself keeps your angle grinder away from getting overheated.
• Spindle-lock Switch: Helps you replace wheels by locking, ensuring a safe wheel adjustment.

Note: It doesn’t matter whether your power tool has safety features or not; putting on safety gear before any operation is a wise idea, like gloves, face masks, boots, and goggles.

The Final Verdict!

When you think about sanding concrete, there is nothing more reliable and better than a top-quality angle grinder. And this is what I did; I’ve added the best 7-inch angle grinder for concrete in this review post, for which you can find out your best match, depending on your budget and overall requirements.

But if you’re still confused, I’d strongly suggest relying on my front-runner, which is the Makita GA7021 7 Inch Angle Grinder. The rubberized grip, heavy-duty motor, and excellent RPM range make it a real topper!

There is no doubt that angle grinder is a versatile power tool designed to deal with multiple applications. But I’ve seen many people afraid of cutting sandstone slabs with an angle grinder! Trust me; it’s one of the easiest tasks to perform that can be done by having just a little bit of knowledge on DIY. 

So if you think cutting sandstone slabs using an angle grinder is a real hot potato, this post is just for you. Here, I’m going to teach you a lot more things, including how to cut aluminum, wood, and even concrete slabs using nothing but your angle grinder! 

Cutting Sandstone Slabs with Angle Grinder:

• Step-1: Collecting Necessary Gear 
• Step-2: Drawing Chalk Lines 
• Step-3: Positioning the Slab
• Step-4: Estimating the Surrounding 
• Step-5: Let’s Start Cutting It!
• Step-6: Hammering the Slab

How to Cut Sandstone Slabs with Angle Grinder?

Step-1: Collecting Necessary Gear

As you’re going to deal with dust clouds, you better cover yourself as much as possible by getting safety dresses, including dust masks, headphones, gloves, safety glasses, and helmets (optional). After that, make sure you have got the right cutting blade that is diamond-tipped for your angle grinder. 

Step-2: Drawing Chalk Lines

Next, get your hands on the chalk to make lines onto the sandstone slabs where you want to cut through. Feel free to take help from a ruler while marking lines. Check twice to confirm everything is alright. And leaving a space of at least .25 inches for each joint gap will be needed.

Step-3: Positioning the Slab

Now you must position the slab that you want to cut on a surface that is flat as a pancake! Placing it firmly is a must; if not, you won’t make the straight cuts using your angle grinder. If possible, collect an extra sandbag or such a thing that’ll assist in ensuring maximum stability possible. 

Step-4: Estimating the Surrounding

It’s pretty crucial to look for the surrounding where you’re thinking about cutting sandstone slabs. As you may end up with a massive amount of dust while making cuts, ensure to maintain for at least 6.5 feet distance between your and walls, getting plenty of space maneuver. 

Step-5: Let’s Start Cutting It!

After setting up all the nooks and crannies, turn on the blade straight away and start cutting the sandstone slabs at a snail’s pace from one side to another. To maintain adequate stability, I’d say use both of your hands in terms of holding the blade. 

Ensure to press as firmly as down and push pretty gently across the marks you’ve made for. 

Step-6: Hammering the Slab

Turn over your sandstone slab after shutting down the angle grinder. Afterward, hammering the slab is what you’ll do where half-cuts have been created. While hammering, you should notice the slabs are getting broken around the chalk lines. If not, then restart your angle grinder in terms of going over those marks once again. Afterward, you’ll definitely find yourself successful in order to cut sandstone slabs. 

Cutting Wood with Angle Grinder – Tips and Tricks:

• Getting wood carving discs should be your first and most important task while cutting wood with an angle grinder. Although regular blades can cut wood, you won’t get the results you desire for
• Stay away from pushing so hard; instead, you need to cut slowly as there might be a slight chance of accidental kickback. To reduce the risk, ensure to cut following the straight angle.

Cutting Concrete Slab with Angle Grinder -Tips and Tricks:

• First off, the mark those areas which you’re going to cut concrete through an angle grinder.
• Clamping the block should be in a downward position to make precise cuts and that too without any block movement. 
• After creating deep cuts of a couple of inches, chiseling out the loose concrete slab is what you’ll do. Try to keep on doing it till you’ve got what you’re looking for. But make sure you’re gently doing the whole cutting aluminium.

There is no doubt that angle grinder is a versatile power tool designed to deal with multiple applications. But I’ve seen many people afraid of cutting sandstone slabs with an angle grinder! Trust me; it’s one of the easiest tasks to perform that can be done by having just a little bit of knowledge on DIY. 

So if you think cutting sandstone slabs using an angle grinder is a real hot potato, this post is just for you. Here, I’m going to teach you a lot more things, including how to cut aluminum, wood, and even concrete slabs using nothing but your angle grinder! 

Cutting Aluminum with Angle Grinder: Tips and Tricks:

• The aluminum-cutting disc should be abrasive when you go for cutting aluminum using angle grinder.
• Ensure to join the disc firmly on your power tool, and the piece of aluminum should be placed on a completely flat surface.
• Mark those lines using chalk, which you want to cut through your angle grinder. Hold it firmly using both of your hands, and don’t hurry while doing it. 

Final Words!

Cutting sandstone slabs with an angle grinder seems quite easier than before as I’ve shown you the simplest ways and techniques to get it done. Feel free to follow all the tips mentioned above, ensuring the best and safest cuts of wood, aluminum, and concrete slabs. 

Starting from DIY projects to repairing things, the use of cordless drills is endless. No matter how basic your tool kit is, you should always have a cordless drill to add extra convenience and efficiency to your job. Assuming you don’t have any cordless drill in your tool kit till now, you are probably thinking about getting one. But what is the market saying here?

Cordless drills come in different varieties at different price points on the market. So making a buying decision is not easy at all. As a former carpenter, I have reviewed countless cordless drills in my lifetime, and my experience says that most of the time, the buying decision comes down to the price.

So, today I will discuss two of the most popular cordless drills from two different brands, Black and Decker vs. Dewalt. So, why have I decided to pick these two? The main reason is that though both these products are equally popular, they come in totally distinctive price points.

So, without wasting any more time, let’s get into comparison and see what each of these cordless drills brings to the table. This will help you clear out any decision regarding these two products.

Dewalt vs. Black and Decker Cordless Drill: Key Differences

With that huge price difference in mind, it’s pretty obvious there will be some key differences between Dewalt vs. Black and Decker 20v cordless drill. So, let’s look at them in different segments to find out which will be the better choice for you.

Power

As a power tool, the key difference was supposed to be in the power department of these cord drills. The max power varies as the Dewalt has 300 watts while the Black and Decker has a maximum of 1800 watts. But surprisingly, both of these corded drills come with the same 20 volts. Twenty volts is pretty common for cordless drills and is often considered the standard in this particular segment.

One important thing to note here is that neither the volt nor the wattage draws the complete picture of the motor’s performance. However, popular opinion dictates they are a pretty good indicator. So, in terms of power, there is no major difference here as both cordless drills pack more than enough punch for any household repair job.

Ergonomics

After the power segment seems like a draw between two cordless drills, let’s move on to ergonomics. Now, ergonomics is an essential factor to consider as it’s closely related to the comfortability of the particular machine. We want a tool that’s small, lightweight, and still packs enough punch to pull off the job flawlessly. With a heavier drill in hand, it’s way easier to build fatigue.

Though it doesn’t seem like a big deal, this is where the better drill appears to have the lead. Dewalt’s drill is a little lighter and compact than the Black and Decker drill in terms of form factor and weight. Now, Dewalt has been able to pull it off because of the motor, and I’ll come to that later in this comparison. But, for now, Dewalt is the clear winner in the ergonomics department.

Motor

Remember I mentioned that the power rating doesn’t draw the complete picture? That couldn’t be truer as we look at the motor of both these drills. Despite having similar voltage and wattage, Dewalt cordless drill comes with a brushless motor, while the Bland Decker has a brushed motor.

Before we get into the benefits of brushless motors, let’s have a quick look at how both these motors work. While both motors use magnets to spin, the power is delivered by an internal circuit in brushless motors. On the other hand, the brushed motor’s power delivery is done through carbon brushes.

The elimination of carbon brushes in motors provides the following benefits:

• Smaller form factor
• Lightweight
• More power
• Less power consumption
• Less friction and heat
• Longer life span

In the past, brushless motors were only seen in high-end power tools that cost a lot of money. But things are changing slowly as we see more brushless motors in the budget segment.

However, as the Black and Decker falls under the ultra-budget-friendly cordless drill, it was somewhat expected to see a brushed motor here. But the talk of cost aside, Dewalt cordless drill is again the winner here with a more sophisticated brushless motor.

RPM

RPM refers to the drill’s rotation per minute. So, the max RPM means the maximum amount of speed a drill can achieve. In this case, there is a significant difference between the RPM of the drills.

While the Dewalt cordless driver has a staggering RPM of 2250, the Black and Decker have only 750 RPM, one-third of Dewalt’s speed. So, how does higher RPM help? The answer is pretty simple. With more drill bit rotation, it’s easier to push through any object, especially harder ones.

Another drawback of Black and Decker is that it doesn’t have any operation modes to control the RPM and torque, while the Dewalt cordless driver has three. With these operation modes, you can easily calibrate the RPM according to the drilling object. In addition, it’ll save you from wearing out the drill bit. So, in terms of RPM, Dewalt is again the clear winner.

Clutch

Clutch is another important factor of efficient drilling since it controls how far the drill bit will work. You might also recognize it as the torque selector. This clutch disengages the bit when it reaches a certain level of resistance.

Depending on where you want the bit to stop, every drill has several clutch positions that can be adjusted. The number of clutch positions usually varies from model to model. Here, the best practice is to get the drill with a wider range since you’ll have more options.

In this comparison, the Black and Decker cordless drill has 24 clutch positions, which is impressive to see in this price range. On the other hand, Dewalt cordless drill has only 15. Though most of the tasks done with cordless drills don’t require such a wide range of clutch positions, it is easier to tailor the drill job according to the material. So, in this case, Black and Decker is the clear winner.

Battery Backup

Any cordless tool out there is just as good as the battery backup it gets. No matter how great the performance is, the battery backup can be a drill breaker since the drill can stop in dire needs. So, who do you think gets the lead now? It gets confusing since both cordless drills are powered by the same 20V lithium-ion battery.

Now let me clear out the confusion here. Though the battery packs hold the same amount of power, the motor seems to decide. Due to the brushless motor, Dewalt claims to have an impressive 57% more runtime than a brushed motor.

So, in terms of battery backup, Dewalt cordless drive will provide you with more juice.

Warranty

The warranty has been a great general indicator of a product’s quality and longevity, and these cordless drills are no different. The longer the warranty period, the longer you’ll be using the drills without worrying.

In this regard, Dewalt again seems to have a slight lead over Black and Decker. While Dewalt is providing a three-year warranty, Black and Decker isn’t falling much behind with two years of warranty.

Additional Features and Accessories

Though this aspect is not directly related to the performance of these cordless drills, they surely help add more value to the products. However, this last segment seems like a draw as both cordless drills offer separate accessories.

Dewalt’s cordless drill package comes with a carrying bag which makes it easier to carry around. Additionally, both the drill and impact driver have three LED lights embedded in the front of them to work easily in dark corners.

While Black and Decker don’t seem to provide any of these extras, it does come with tons of extra drill bits. With the cordless drill, you’ll get,

• Brad Point Drill Bits x6
• 1″ Screw driving Bits x10
• 2″ Screw driving Bits x9
• Nut Drivers x4
• Magnetic Bit Tip Holder x1

So, in this segment, it’s a draw again, and both these cordless drills offer something useful.

After the detailed discussion, let’s have a quick look at the differences again. It’ll help you sum up the decision between the Black and Decker 20v drill vs. Dewalt 20V drill.

Features	Dewalt	Black and Decker
Power	Tie	Tie
Ergonomics	Winner	Runner-up
Motor	Winner	Runner-up
RPM	Winner	Runner-up
Clutch	Runner-up	Winner
Battery Backup	Winner	Runner-up
Warranty	Winner	Runner-up
Additional Features and Accessories	Tie	Tie

Black and Decker 20v Drill vs Dewalt: Which Cordless Drill Best for Your Job

Review of Black and Decker 20v Drill vs Dewalt, two of the best cordless drills and features are discussed here in detail, it will be useful to know which one is perfect for you.

1. Dewalt 20V Max Lithium-ion Cordless Combo Kit

Dewalt has been one of the most reliable names in the power tool industry for a long time. This time with a 20V cordless drill combo, Dewalt again proved why it’s so popular.

The combo drill kit comes in a durable plastic carrying case, and you have to love Dewalt for that. Carrying these tools is so much easy and convenient now. Then it’s time to get the tools out of the box. Dewalt’s trademark black and yellow design will take your attention to the drill and impact driver’s beautiful and handy ergonomics design.

If you work for long hours, these cordless tools will allow you to do that without discomfort or fatigue. To make the tools more convenient, three LED lights are equipped at the front of each kit tool. So if you need to work in dark corners, you can do that without any difficulties.

The motor is rated 20V, pretty standard for the cordless drill segment. However, the motor still stands out as it’s brushless. The brushless motor allows the drill to have a smaller size, more power at reduced power consumption, and, most importantly, a longer life span. With an RPM of 2250, it can go through any object you throw at it.

There are 15 clutch positions to calibrate your drill experience, but I would like to have at least 24 for the best customization. Lastly, Dewalt is providing a 3-year warranty for the kit. That ensures you’ll be able to use it for a long time.

Every feature considered, this combo kit is one of the best you can find on the market right now. The price is a bit high, but it’s worth the investment due to the performance and additional features that make the user experience great.

Features

• Brushless motor for a more robust and efficient operation
• 20V lithium-ion battery
• Ergonomic and lightweight design
• 2250 RPM with 16 clutch position
• Backed by a 3-year warranty
• LED lights at the front of each tool

2. BLACK+DECKER 20V MAX Cordless Drill

Unie the previous Dewalt model; if you are trying to complete your purchase at a tighter budget, this Black and Decker can be an excellent choice for you.

You’ll notice how beautiful and lightweight the construction is right out of the box. Admittedly, the drill is not the lightest since it has a brushed motor but is lightweight enough to make up for a comfortable user experience.

This drill, too, comes with a 20V motor, the standard one for most of the drills out there. However, the RPM is relatively lower this time, only 750. It’s not a lot, but you should do most DIY jobs and home repairs with it. 

The Black and Decker cordless drill offers 24 clutch positions to adjust the drill despite being budget-friendly. So, no matter how delicate holes you need to make, this cordless drill, always be up for the job.

The drill runs on a 20v battery, a standard number for a cordless drill. The backup might not be as great as Dewalt’s drill as that one had a brushless motor, but good enough to back you up for a long time.

In the accessories department, Black and Decker’s cordless drill offers something that no one in its price segment provides. With the drill, you get a set of 30 different drill bits to do any job you want.

Overall, we have to appreciate that Black and Decker is allowing you to have the convenience of cordless drills below $50. Backed by a 2-years warranty, it’s a deal you don’t want to miss if you are on a budget.

Features

• 20V brushed motor
• 20V lithium-ion battery
• 24 clutch position
• 30 different drill bits included in the package
• It comes with two years warranty

Final Verdict

As you can see, Dewalt cordless driver gets the win in almost every segment. So, is Dewalt better than Black and Decker? Unfortunately, there is no direct answer to this question as both cordless drills are targeted towards two very different budget segments and user groups.

Though the Dewalt looks like a better choice, it doesn’t take away anything from what Black and Decker tried to accomplish through this absolute bang for buck cordless drill. Black and Decker’s cordless drill is almost impossible to beat in its respective price segment.

A drill press vise is an indispensable tool for any woodworker or metal worker. But how does it work? How do you use it? What are the benefits of using this machine, and how can you make sure that you’re getting the most out of your investment with these tips? This article will cover everything you need to know about how to use a drill press vise and what the best practices are when it comes to usage.

It’s not hard to find videos or tutorials on how to use it. As YouTube alone is littered with them, there’s no shortage of video guidance on the subject. But if you’re looking for a quick overview of it, then you’ve come to the right place

What are the Uses of a Drill Press Vise?

A drill press vise is known for its usefulness in holding a work piece in place during drilling, cutting, and other operations. They are often found on drill presses and allow users to securely hold work pieces without the need for clamps or other gripping devices. This is beneficial as it saves time and prevents users from wearing their hands out as they use it.

A drill press vise is a tool that machinists have used for decades, but many home handy-persons do not have a drill press vise in their workshop. Yet, this simple device has so many great uses that it’s hard to imagine working on projects without one. Here included some uses of drill press vise: 

• Metalworking
• Woodworking
• Gluing
• Sawing
• Drilling
• Sandpapering or filing
• Adjusting or screwing
• Cutting conduit

How to Preparing Your Drill Press Vise

When you’re using a drill press, preparing your vice is an important step. But it can be complicated to do it the right way. So whether you’re planning to use your drill press as a replacement for a table saw or need to drill a few holes in wood, your drill press is an integral part of your workshop.

Use a clamp or drill vise when drilling holes in metal. Secure the workpiece by holding it between two clamps, so it doesn’t slip. Cut with a slow, steady motion. Remove the drill bit before starting and lubricate the bit with oil after drilling.

How to Use a Drill Press Vise Properly

If you’ve set up your drill press vise according to the instructions, and now it’s time to test the vise. The other thing you want to do is give it a test run so you can make sure it’s working right. Here are the instructions you should follow when using your drill press vise:

1. Mark the drill point spot

Mark the drill point before mounting the vise in the drill press table. If you don’t mark the drill bit on the underside of the table, your drill point won’t line up with the hole in the vise, and you’ll drill in the wrong place.

2. Open the jaws

When you have a large workpiece that will not fit in your vise, you can use a pair of vise-grips to hold the workpiece in place. Then, open the jaws of the vise grips and position them around the workpiece.

3. Position the workpiece

Your drill press vise has several different uses, but using it to hold a workpiece in place is one of the most common purposes for this tool. In the first place, you have to make sure that the workpiece is secure and won’t move during machining. At present, there are three points of contact between the workpiece and vise. However, when it comes to positioning, one point is not enough.

4. Close the vise jaws

The final task is tightening the vice. All you need to do is turn the handle in a revolving direction. Make sure that the object cannot slip out of place before moving on to the next step.

5. Setting the alignment

Contractors need to make sure that they are drilling in the right place. In addition, it is essential to align the drill bit with the drill point on the object so that it will not ruin the thing or the work area.

6. Start Drilling

When the workpiece is centred properly in the chuck, you can begin a cut. When you are sure of the exact position of the drill press, slowly turn on the machine and then lower it down onto the item you have clamped in place.

Safety Precautions When Using Drill Press Vise

The drill press vise is one of those machines that can be quite dangerous if not handled with care. When using a drill press vise, you should always check to ensure that the vise is securely fastened to the drill press table. If it isn’t, it can cause serious injuries. Also, you should always wear eye protection to prevent eye injuries from flying debris.

To ensure that the workpiece is secured and properly aligned, the workpiece should be attached to the vise using clamps, C-clamps, or a drill press vise. The vise should be able to grip the workpiece from any angle on the table. You can adjust the jaws of the vise to match the diameter of the workpiece.

Choosing the Best Drill Press Vise For Your Needs

Before you choose a drill press vise for your needs, make sure that you know what you’re going to be using it for and how much you’re willing to spend. There are a few different types of drill press vises, and they’re all designed for other things.

Purpose

The purpose of using a drill press vise is to hold the wood or metal while you’re drilling. The drill press vise has a wide range of uses. It’s to help you decide how big or small the vise should be and any additional features you need. It can be used to hold wood, metal, plastic, and many other materials.

So your purpose will help you decide if a vise is for you or not. Before purchasing a vise, first, determine your goal so you can make an informed decision on your needs and wants.

Construction

The quality of the drill press vise is important as the vise will hold the woodwork in place while you drill into it. Please check that the vise is made of high-quality materials, as this will ensure that it does not break while you are using it.

Compatibility

Look for the correct drill press vise compatibility before you purchase a drill press vise. Some drill presses have the vise built-in, but most of them do not. If yours does not have a vise built-in, you will need to purchase a vise separately.

If you have additional equipment, make sure the drill press vise will work with those tools, too. It will need to be compatible with your drill press.

Throat Depth

The first thing you’ll want to consider is the throat depth. The throat depth is the measurement of the distance from the screw to the top of the jaws. The larger the throat depth, the more depth that you can drill through.

If you’re only going to be drilling holes through thin materials, then you can get by with a smaller throat depth.

Jaws Surface

Look for a drill press vise with jaws with a flat surface and accurate to the size of the drill-press table. The jaws should be about two inches wide and five inches long, and they should be made of solid steel, not cast iron.

Type of Material

Many different types of material can be used to make a drill press vise. The most common are cast iron and cast aluminium. Cast iron is the stronger of the two materials, but it is also significantly heavier. Cast aluminium is lighter and easier to move around, but it is not as strong as cast iron.

Weight

Drill press vises range in weight from 3 lbs up to 50 lbs. Heavy vises are ideal for drilling large holes and more extensive stock; however, heavier vises don’t need to be bolted to the drill press because they won’t flex or vibrate when mounted. The weight of the vise will largely determine how stable it is.

Warranty

When looking for a drill press vise, remember to look for a warranty before purchasing one. It is always important to make sure that you can get it fixed or replaced if anything goes wrong with your vise.

Final Thoughts

That is all you need to know about working with a drill press vise. Before buying a vise, research as much as possible. There are many types of drill press vises, so it’s important to research the various types and their strengths and weaknesses.

Once you’ve done your research, you should be in a better position to pick the right one. It would be best if you also considered safety when working with such machines to avoid injuries. Safety equipment is an excellent idea, especially when using such machines for heavy-duty drilling.

Due to the similarities in design and overall outlook, many people interchangeably use 7 ¼, and 10-inch miter saw. And guess what? Most of them have ended up with the results they weren’t waiting for.

That’s the reason why I decided to compare the features and essential specs to find out whether they are different from each other or not. Afterward, I’ve found some noticeable differences, which is what the 7 ¼ vs. 10-inch miter saw post is about.

Here, I’ve compared some of their features to help you understand which makes them different and which one can be your cup of tea for your upcoming projects. So let’s start digging deep!

7 1/4 vs. 10 Miter Saw Comparison:

Do you want to get detailed information on the 7 1/4 miter saw vs. 10 miter saw? Well, you’re only a step away from knowing some of their common differences. So let’s find out:

1. Size

The very first difference anyone can notice is the size they show off. Compared to the 10-inch miter saw, a 7 ¼ miter saw equips a relatively small-sized blade to cut material of either 2 x 12 or 1 x 12 lumber. Speaking of the 10-inch, it can work with 4 x 4 lumber as well.

2. Difference in Functionality

Although both 7 ¼ and 10” miter saws are made for cutting several materials at once, you won’t get the same result after using them for the same purpose. For instance, a 10” miter saw isn’t always the best pick to work with wider boards. In contrast, the 7 ¼ miter saw can be ideal for cutting those boards.

Can you guess the reason? Well, this is because if the blade appears smaller in size, it becomes more capable of exerting optimum pressure during the cutting period. This results in excellent feedback when you want to work with wider boards.

Nevertheless, it’s equally valid that they can make both crosscuts and straight cuts. But unfortunately, 7 ¼ miter saw can’t meet your demands for making bevel cuts while 10-inch can easily do it.

3. Range of Speed

The overall speed slightly differs while considering 7 1/4 in miter saw vs. 10 miter saw. Due to the extensive power, 10-inch saw can spin way quicker than a seven 1/4-inch miter saw. This way has earned the capability to deal with multiple materials.

But the case might be different if you spend extra more dollars on a 7 ¼ miter saw. Thus, you may get a more powerful device to get the maximum speed possible.

4. Blade Functionality

You can find almost the same appearance while considering a 7 1/4 vs. 10-inch miter saw. But there is something that makes them different from each other, especially in terms of their blade functionality; guess what?

Well, a standard seven ¼-inch miter saw assists the blade in pivoting right and left. On the flip side, a traditional 10-inch miter saw includes an extra feature out there, meaning the sword can pivot right, left, and also tilt to one side while required.

5. Price

Put a smile on your face as 7 1 4, and 10-inch miter saws are available in both affordable and expensive price tags. So a hobbyist or newbie, it doesn’t make sense to spend a fortune on a high-end choice. In my opinion, you better boost your skills and then decide to buy something expensive for heavy-duty projects.

So, Which One Stands Out 7 1/4 or 10 inch Miter Saw For You?

I don’t think it’s going to be a race between the hare and the tortoise, is it? Jokes apart, both 7 ¼ and 10-inch miter saws are great in their ways as each of them has some limitations with specific pros and cons.

Are you getting confused?

Let me help you then; if you’re someone who needs to work with wider or relatively larger boards often and often, it’s better to choose the 7 ¼ miter saw. But if you need to make bevel cuts every once in a while, then a 10-inch miter saw should be your go-to!

Professionals require something that runs so faster to get the work done quickly. In that case, you can, once again, rely on the 10-inch. However, a few customers aren’t interested in spending more cash on a miter saw since most are hobbyists or DIY-ers. So if you’re one of them, then get your hands on the 7 ¼ miter saw that costs you pretty much affordable!

Wrapping Up!

I’ve ultimately given you the answer of which one you need to get while considering 7 1/4 vs. 10-inch miter saw. Make sure you determine your sawing requirements, daily work projects, and your budget before spending any of them. By doing so, you’ll end up purchasing the right one!

Have you noticed your old cordless drill isn’t working as before? Or you’ve found it completely useless? I don’t think you should use the word “useless” if you have such a power tool because you can easily convert your cordless drill to a corded drill; you heard it right! 

Cordless to corded drill conversion is way easier than it sounds! This can be done with ease if you have just a little knowledge of repairing drill machines. I’ve even seen many drillers who utilized this technique, and luckily, they made it. 

It’s nothing wrong to turn your cordless drill into a corded, especially if it becomes weaker than usual, period. And by doing so, you can save yourself from spending extra dollars on a new high-end corded drill. After all, a penny saved is a penny earned! 

So let’s cut to the chase without further ado!

While cordless to corded drill conversion, take off the old battery from your cordless drill, remove the solder wires through soldering tools, and then join the other side of wires to your 12V power supply.

Things Needed:

• A 12V Power Supply (10A)
• Soldering tools
• A screwdriver
• Sufficient Wire

How to Convert a Cordless Drill to a Corded One – Step By Step Instruction:

To convert cordless drill to corded drill, you first need to collect the above-written stuff, and then you’re ready to move forward. Follow the basic steps given below:

Step-1: Taking Off Old Battery

As you’re going to convert your cordless drill to corded, the very first task to perform is to take the old battery out of the device. In that case, take help from your screwdriver.

Step-2: Removing Solder Wire

Let’s take help from your soldering tools in order to remove the solder wire carefully. While doing it, make sure the solder gets as much heat as possible to break connections of the existing wires instantly.

Step-3: Connecting Wires to Power Supply

The title says it all; get your hands on the other side of wires to make a connection between wires and the 12V power supply. Once you’ve connected successfully, turn on your cordless drill and Voila! You did it! This is how to turn a cordless drill into corded.

Note: To get a practical idea of turning a cordless drill into a corded drill, watch this short informative video.

When It Becomes Necessary to Turn Cordless Drills into Corded Drills?

Is the battery of your cordless drill becoming dead or completely useless? If yes, this is probably the main reason for turning a cordless drill into the corded drill. After roughly using a cordless power tool, the battery gets weaker day by day. Even it can lose its actual power way before than usual if you’re unable to take proper care of your device. 

So if it happens, you can turn your cordless tool into corded by following the steps mentioned above. But don’t make the mistake of jumping into the process right away. Be sure to collect the necessary stuff, and having at least a basic knowledge of repairing power tools is mandatory to get the work safely done.

How to Charge the Battery of Cordless Drill without any Charger

Using any laptop charger won’t be a bad idea to charge your 20V/18V cordless drill battery. There are other available ways you can apply; this includes attaching AA cells in series, taking help from another cordless drill battery, or getting a balanced “LiPo charger.” 

But before you use any lithium polymer charger, make sure your cordless power tool is compatible with that. If not, then there’s at least a little possibility of ending up with an explosion; it’s a rare case, though. 

Last but certainly not least, it’s okay to take assistance from a solar panel of 12V for charging up your cordless drill without any charger; it’s that simple!

Is a Corded Drill More Powerful than the Cordless One?

Due to the access of 110V, most corded drills show off extreme power. They usually get superior motors that make the drill capable of producing significantly more speed and torque than the cordless drill machines. 

Don’t get me wrong; the current market has hundreds of top-notch cordless models which are stronger and versatile. But in most cases, corded drills are best suited for projects related to heavy-duty. So before purchasing any, you better make a decision wisely on which suits your drilling projects most.

Wrapping Up!

Finally, cordless to corded drill conversion appears to be child’s play now since I’ve shown you the basic steps to get it done. So try this out if you notice your old cordless drill isn’t working, or let’s say the battery has turned almost useless. I’m pretty sure you’ll do that without any risks and troubles. Afterward, your tool won’t seem useless anymore, which is what you want to, suitable?

Probably the upcoming projects are knocking on your door, and you’re failing to make your decision on buying the right impact driver! So to help you get rid of this confusing or annoying situation, I’ve come up today with an exciting battle of 1/4 vs. 3/8 vs. 1/2 impact drivers. 

Why these 3? Well, although there are so many choices out there, many people interchangeably use them and end up with the result that they didn’t expect! So when you decide on buying the right piece, make sure to look for the size, functionality, design, and let’s not forget about the level of precision. 

I’m pretty sure you’ll earn plenty of knowledge from here by giving this article a read from top to bottom. So let’s dive in without more chit-chat!

When you compare 1/4 vs. 3/8 vs. 1/2 impact driver, you’ll notice the ½” impact driver stands out for its excellent power. The 3/8 impact driver is the winner due to its higher accuracy level, while the ¼” impact driver is compatible with tight spots.  

1/2-Inch vs. 3/8-Inch vs 1/4-inch Impact Driver: Feature Differences

Before you spend your cash on any impact driver, make sure to compare each of them between ¼ vs. 3/8 vs. ½ impact drivers. By doing so, you’ll get a quick idea of what suits your tasks most.

Features	½” Impact Driver	¼” Impact Driver	⅜” Impact Driver
Size	Slightly bigger and heavier	Smaller than the ½ impact driver	Smaller and more lightweight
Power	High	Mediocre	Less powerful
Functionality	Compatible with open areas	Friendly with tight areas	Same as ¼ impact driver
Design	Convenient	Convenient	Convenient
Accuracy	Less accurate	Mediocre	More accurate

1/2-inch vs. 3/8-inch Impact Driver: Detailed Comparison

Here, I’ll make a discussion on the ½-inch vs. 3/8-inch impact driver to help you understand which one is suitable for your projects. Let’s get started:

Power

Are you involved in those tasks which require a higher amount of torque, power, and pressure? If so, then having the ½-inch impact wrench can be a smart move instead of the 3/8-inch.

An impact range of ½-inch can cover a large range. AS for the power output, it’ll be just enough to take off, drill, or other common projects related to heavy-duty.

Talking about the 3/8 impact wrench, it stands behind the ½ impact driver in terms of power as it can’t offer optimal power output needed for heavy-duty projects. Thus, the 3/8” impact driver is ideal for those tasks which need accuracy more than power.

Size

When you go to purchase any impact driver, looking for the size is mandatory. Indeed, there are a couple of different sizes available, and these include 3/8”, ½,” ¼,” and 1”.

While comparing between 3/8 and 1/2, noticeable differences can be found. In the fewest possible words, ½” is the bigger and 3/8” is the smaller version to choose from.

You may also notice the overall weight while comparing the size. Again, due to the small size of the 3/8” impact driver, it’ll seem more lightweight than the ½” impact driver.

Functionality

This is where the 3/8 impact driver comes into play! As I’ve said before, this particular driver focuses more on precision rather than power, thanks to the compact design it shows off.

Using a 3/8 impact driver will be easier to maneuver when precision is needed in your drilling or other working projects. On the flip side, the 1 2 impact driver focuses more on the power in place of the accuracy, and it requires extra force to work efficiently.

Precision

If precision is what you’re concerned about, then I think you shouldn’t look for anything except for the 3/8” impact driver. Because of the lightweight structure, it comes with, controlling it will be easy as pie!

But for vital tasks, you better get your hands on the 1 2 impact driver that has more power and capability to deal with heavy projects no matter what.

Design

Put a smile on your face as both 3/8, and ½ impact drivers are well-equipped with ergonomic characteristics, enabling users to have a firm yet convenient grip for an extended period. The credit goes to the features given below:

• Rubber handle comfortable grip
• Ergonomic and compact shapes
• Variable speed options
• Built-in LED light for increased illumination on low-light areas.

3/8 or 1/2 or 1/4 Impact Driver – Which One Is Better For You?

Are you finding yourself in the ocean of confusion? No worries, I’ve got you covered. I’ll help you decide which one is ideal for your projects from 3/8, ½, and ¼ impact driver.

If you need to work on open areas where power matters a lot, then I think getting the ½” impact driver should be your best and ultimate decision.

On the flip side, you often have to work on tight areas where accuracy matters most; then, nothing can beat the efficiency of a 3/8” impact driver. In addition, it’s comparatively light in weight that allows users to work with the maximum comfort possible.

Although a 1/4” impact driver works just fine in tight areas, the level of accuracy may drop down from time to time.

Frequently Asked Questions:

1. Impact driver vs. wrench – what is the difference between them?

In a nutshell, a piece of the impact driver is engineered to drill something between mid-to-long screws in the wood pieces or metals, while the impact wrenches play a key role in tightening up the nuts or bolts or loosening them.

2. Which should I get to tighten up lug nuts, 1/4 or 3/8 impact driver?

As I’ve said earlier, impact drivers shouldn’t be your cup of tea to tighten up lug nuts. You better switch to a high-quality ½ impact wrench to get the work successfully done.

3. Is a ¼ impact driver any good?

An impact driver of ¼” can be one of the best if not the best choice to remove trim screws, small nuts, and bolts. But it’s equally true that you shouldn’t go with this one while dealing with mid to large-sized bolts.

4. What is the approximate range of torque of any 1/4 impact driver?

Although it differs from model to model, the average torque range of a ¼ impact driver is around 200 in-pounds to a maximum of 1600 in-pounds. Thanks to the mediocre weight and compact design, enabling it to make an entry in smaller areas, minimizing user fatigue.

5. What should I do with my impact driver?

Impact drivers are made of multiple applications, from driving carriage bolts to securing screws into walls. But you should keep your impact driver from drilling projects no matter what! Also, it shouldn’t be used to over-tighten screws. Be careful about it.

Wrapping Up!

You can get yourself the one that matches your daily projects among the 1/4 vs. 3/8 vs. 1/2 impact driver. Believe it or not, it isn’t just a matter of choice; getting the right impact driver is crucial to get the most out of it. So feel free to do some more research if needed, especially to find your best match.

I wish you good luck!

Things may get even worst when you go to use your newly-purchased impact driver, and you notice a piece of drill bit has just got stuck in your power tool! Damn, what an awkward situation it is!

Unfortunately, most of you don’t know why a drill bit stuck in an impact driver and how to solve this bummer! From choosing the wrong piece of bit to set it up inappropriately, there are a couple of reasons why you’re going through such annoying situations.

So here, I’ve come up with a few solutions to help you out. First, I’ll make sure you become able to remove a stuck-on drill bit from your power tool! Whether you’re operating an impact driver of Makita, Dewalt, Milwaukee, or anything else, my handpicked techniques can be applied for almost every top-notch model, guaranteed!

Why Does a Drill Bit Gets Stuck In Impact Driver – 4 Probable Reasons behind It

Before you know how to remove stuck drill bit from impact driver, the first and most important thing is to look for the probable reasons why it gets stuck. Unfortunately, there are so many reasons!

• Reason-1: Many people don’t focus on oiling the chuck properly, but it’s indeed one of the major reasons behind a stuck drill bit. Frequent oiling makes it way better to both slide out and slide it with a bit of drill.
• Reason-2: Probably, the chuck becomes overly tight due to the excessive vibration that occurs while drilling more often. At that time, you’ll notice the drill bit gets stuck, and you’re unable to get it out!

• Reason-3: Lack of maintenance is another common reason. An Impact driver requires to be cleaned up after a certain period. If not, the accumulation of dust gets higher and results in jamming.
• Reason-4: Don’t prove yourself foolish by using inappropriate drill bits for your impact driver! I’ve seen a lot of people who made the serious mistake of using the wrong bits and ended up getting stuck in an impact driver.

How to Get Stuck Bit Out of Impact Driver – 2 Effective Methods!

Let’s cut to the chase! Once you’ve learned some of why a drill bit is stuck in an impact driver, it’s time to learn how to remove the bit from the impact driver with ease and quick. It’s going to be easier than you think about, trust me!

Method-1: Using Pliers

• Step-1: A pair of pliers will play a significant role in gripping the bit firmly so that you can turn the stuck-on bit anticlockwise.

• Step-2: Don’t push or pull using your whole strength! Try to be as gentle as possible while performing the task to take it off smoothly.
• Step-3: Releasing minimal pressure will be required on that piece of bit, and that’ll let you take off the drill bit much safely from your impact drive. Once again, if you provide too much pressure on it, the bit may get broken inside of the chuck, keep in mind!

Method-2: Using Wires!

Some low-end drill bits might get easily stuck in your impact driver. In this case, you can take assistance from a piece of wire to get rid of it; you heard it right!

So let’s see how the task can be performed:

• Step-1: Grab that piece of wire you’ve collected to get the job done.
• Step-2: Pull the wire a little back and wrap it around the chuck as firmly as possible.
• Step-3: Once you see the wire is strongly holding the mouth of the impact driver, all you need to do is pull the drill bit, and Voila! It came out, and that was easier than it sounds, wasn’t it?

Note: Let it be an impact driver of Dewalt, Makita, Milwaukee, Ryobi, or Ridgid; the technique can be applied for all. Watch it to get practical knowledge on how to remove a stuck drill bit from an impact driver

How to Get Drill Bit Out of Dewalt Impact Driver – Follow the 3 Basic Steps:

I’ve seen many people online asking about how to remove the bit from the Dewalt impact drill. Well, you’re getting the answer just from here:

• Step-1: Get the chuck as loose as possible.

• Step-2: Take one of your hand’s assistance to hold up the chuck. Similarly, use another hand to grab the handle firmly.
• Step-3: Be sure you’re turning the chuck anticlockwise, preferably to the left side, while losing it. By doing so, you’re allowing the jaw to get opened, and this will enable you to take off the drill bit from your Dewalt impact driver.

How to Change Drill Bit Dewalt?

• Step-1: Grasp the chuck right away using nothing but your hands.
• Step-2: Turn it anticlockwise to take it off from your impact driver.
• Step-3: Get your hands on the right piece of drill bit that suits your Dewalt. You can take the manufacturer’s help or can do your research online.
• Step-4: Insert the bit into the hole, and then turn the chuck in the opposite direction to make it tighter. Could you turn on the switch, and wow, you did it?

Note: Click here to get a practical idea on changing drill bits, Dewalt.

How to Get a Drill Bit Out of a Makita Impact Driver – Follow the 3 Basic Steps:

How to remove a stuck bit from a makita impact driver? If you’ve ever had to take apart a drill bit from your Makita impact driver, then you know how frustrating it can be. Fortunately, there are three easy steps to fix this problem. 

• Step-1: Spray some WD40 in the chuck
• Step-2: Grab the bit with a pair of pliers
• Step-3: And run your Makita forward and backwards until it comes loose. Usually works every time.

Note: Click here to get a practical idea on changing drill bits, Makita.

Conclusion

You’ve got plenty of ideas on why a drill bit stuck in an impact driver and how to get rid of it! Although it sounds so complicated to most of you, I’ve made the whole task a breeze through this single post. And I hope you’ll benefit from applying my above-written techniques.

Try this out, and you’ll thank me later!

When it comes to making your home modern yet stylish, laminate flooring is always the best choice. More than that, it is durable and cost-effective flooring. Besides, the floors are free from scratch and impact resistant that makes them stronger.

When it comes to making your home modern yet stylish, laminate flooring is always the best choice. More than that, it is durable and cost-effective flooring. Besides, the floors are free from scratch and impact resistant that makes them stronger.

So, if you choose cutting laminate flooring with a miter saw by yourself, then here in this guide, you can learn how to do this job professionally and efficiently. Without further ado, let us get started! 

So, let’s walk through it and know how to use it.

Essential Things To Cutting Laminate Flooring With Miter Saw

Cutting laminate with a miter saw is not as easy as it sounds. It requires a professional technique that completes work with accuracy without any loopholes. If you are ready, read about the essential things you need. 

• Collect the tools you need
• Spacers
• Eye protection glasses
• Level
• Miter saw
• C-lamps
• L-square

Steps On How To Cut Laminate Plank Flooring With A Miter Saw

Before jumping on the steps, it is crucial to know the facts first. While cutting laminate, it is essential to cut it lengthwise. It is a simple and easy process that takes up to 5 minutes to complete the task. To do this, the pull bar is an effective toolset.

What kind of blade is needed to cut laminate flooring? Most importantly, it would be best if you had a sharp and effective tool like carbide-tipped. It is simple; when you invest in a quality blade, you can easily re-sharp it for future use. Also, it saves a lot of money when it loses its edges.

And now here you go for cutting laminate flooring:

1. Start with spacers

As we said earlier, you use a miter saw to cut wood floors and put spacers along with the wall. Also, it must keep the distance about /3 inches around the wall. It is an essential step to perform because laminate can expand with the changes in humidity. 

2. Measure the laminate board

In the next step, you will need to lay down the laminate board so that its tongue faces towards the wall. However, if you use a laminate cutter blade with its teeth orientation, turn the face-up; otherwise, keep its top facing down.

3. Make accurate cuts

While cutting the floor, you must use a laminate flooring board for accurate cuts. Nevertheless, clamps can also come and help you get real results. When cutting the clamps, ensure you are cutting laminate above the cut line from both sides.

4. Install C-clamps for perfect results

For the proper finish installing c-clamps can help you get the best results. To use this, first put the laminate flooring board in a sturdy place and install the c-clamp to lock the position. Next, cut the plank laminate following the straight edge. 

Then, take the help of the pull bar to put the laminate in the right position. Further, connect the rows calmly and ensure no gap; otherwise, it affects the excellent finish. 

5. Repeat the measurement

When the cutting task is completed, repeat the measurements. Keep in mind, do your work carefully, and ensure safety while cutting, as it is hard to do this.

Here is the video tutorial for you:

Best Saw Blade for Cutting Hardwood Flooring

Well, it doesn’t matter if you are cutting old or new laminate; you need a compatible product that assists you in completing tasks hassle-free. So, consider the following factors when buying the best saw blade for cutting hardwood flooring.

• Types of Saw Blade– miter saws, circular saws, jigsaws, and rotatory tools are the different types of blades you need to choose from. For straight and angled cuts, a miter saw is the best. 
• Saw compatibility– a great saw blade that fits with laminate flooring perfectly. 
• Check diameter & kerf– choosing the right diameter and kerf for smooth cutting is essential. The best is 6.5 inches diameter to 12 inches. 
• Several teeth– Saw blades have four teeth to cut the target quickly and get the clean output. 
• Arbor size is essential to opt for standard sizes such as 3 inches, 6 inches, 7-10 inches, and 12-16 inches. 12-16 inches is the ideal size for laminate cutting. 

Here are our best pick for choosing best miter saw blade for cutting laminate flooring:

1. COMOWARE Circular Miter Saw Blade- 10 inches 80 Tooth

If you are looking for a sharp blade that provides the ultimate finish, COMOWARE is a perfect choice. It has a large tooth that allows you to work conveniently and remove heat dissipation. Moreover, it provides a high-quality carbide material that gives smooth and easy cutting options.

Features:

• Versatile ATB that works in many types
• Bevel helps to eliminate the cross-grain and plywood cuts
• Gullet helped saw to cut flooring fast and accurate
• Laser-cut extension work on distorting & destroying the blade’s of the body

2. Diablo Melamine, Laminate Flooring & Wood Saw Blade

Diablo is yet another best blade for cutting laminate flooring. It is specially designed to cut laminate with accuracy without any flaws. Moreover, it is specially manufactured by Freud, which offers durability and lasts longer with materials and laminates. 

Features:

• Featured with Freud’s perma-shield coating
• Ideal for 12-inches sliding miter saws with portability
• Heat expansion slots 
• Based on laser cut technologies
• Lifetime guarantee

3. Diablo PERGO Blade

Diablo PERGO blade is an ideal miter saw blade for cutting laminate flooring. It is a well-known and most used blade to obtain a smooth and fantastic finish. It cuts like a laser beam and brings fast results. The best of this is it is easy to install and makes your work a little easier. 

Features:

• It is used to install 500-1400 square feet to cut laminate
• This blade will save your money & efforts
• It offers extremely high-quality output
• Includes 40 tooth Dewalt blades 
• Eliminate stress

Is It Safe To Use A Miter Saw With Laminate Flooring?

Yes, if you are using the right miter saw for cutting laminate. A power saw is the best miter saw to cut the laminate floor, with 8-12 inches diameter circular blades. This would help you align the material into laminate flooring perfectly, and it offers better cuts. 

However, it may not be easy to hold the saw for long, but it can be manageable if you know how to do it. Also, one should keep in mind while cutting laminate flooring; you do not need to take things easy.

Here’s how you can use a miter saw to cut laminate flooring.

Miter Saw Using Tips:

Here’s how you can use and make the best use of it. 

• Cut the scoring before working on the entire piece.
• For a smooth finish, do repeatable cuts or draw the angles to make the cuts smooth.
• C-clamps can make your work easier. 
• Keep the things in proper alignment to avoid any minor and major flaws
• While cutting, place the miter saw on the table along with the fence. 

Precautions Cutting Laminate Flooring With A Miter Saw You Need To Follow.

Before Use:

• It is a must to read the owner’s details carefully 
• Ensure you have understood the entire instructions carefully
• Do not avoid the limitations before using it
• Always refer to an expert for any help

When using:

• Always wear safety glasses and gloves to avoid any dust interacting with your eyes.
• Use dust extraction system to avoid dust allergy issue
• Wear an active heat protecting mask
• Make proper adjustments before making cuts and ensure the machine is off while making changes.
• Please keep your hands off from the machine when it is not in use
• Use a crosscut blade for a proper finish
• Check for damages to avoid any issues
• Use unique accessories to maintain its working

The Bottom Line

That’s all we have to say in cutting laminate flooring with a miter saw guide. Using a miter saw can help you achieve the best results you are looking for. All you have to do is complete the work with proper safety and attention to avoid issues. Good luck!

FAQ

What Mitre Saw Blade For Laminate?

Look for a blade with a high tooth count and a fine blade pitch. A good quality blade will make it much easier to get a clean cut on your laminate and will also help extend your saw’s life. When making your selection, check the blade’s compatibility with your particular model of saw.

Do You Cut Laminate Flooring Face Up Or Down?

The answer is face up! Leaving the laminate right-side-up helps to prevent chipping and damage to the flooring. When cutting laminate with a circular saw, use a fine-toothed blade to get a clean, straight cut.

How Many Teeth Do I Need To Cut Laminate?

 An 80 to the 100-tooth blade is ideal for cutting laminate because it provides a smooth, clean cut. The number of teeth on the blade determines how smooth the cut will be.